Rod Mill1.New structure,sand making machine easy installation2.High efficiency and Low consumption3.Low price4.ISO9001:2008
Rod Mill Introduction
Rod Millgrinds material by rotating a cylinder with steel grinding balls, causing the balls to fall back into the cylinder and onto the material to be ground. The rotation is usually between 4 to 20 revolutions per minute, depending upon the diameter of the mill. The larger the diameter, the slower the rotation. If the peripheral speed of the mill is too great, it begins to act like a centrifuge and the balls do not fall back, but stay on the perimeter of the mill. The point where the mill becomes a centrifuge is called the “Critical Speed”, and ball mills usually operate at 65% to 75% of the critical speed.
Rod Mill Application
Rod mill are generally used to grind material 1/4 inch and finer, down to the particle size of 20 to 75 microns. To achieve a reasonable efficiency withrod mills, they must be operated in a closed system, with oversize material continuously being recirculated back into the mill to be reduced. Various classifiers,how to make a rod mill such as screens, spiral classifiers, cyclones and air classifiers are used for classifying the discharge fromRod mills.Rod mill is an efficient tool for grinding many materials into fine powder. Therod mill is used to grind many kinds of mine and other materials, or to select the mine. It is widely used in building material, chemical industry, etc. There are two ways of grinding: the dry process and the wet process.
Rodmills Working Principle
TheRod mill is a horizontal rotating device transmitted by the outer gear. The materials are transferred to the grinding chamber through the quill shaft uniformly. There are ladder liner and ripple liner and different specifications of steel balls in the chamber. The centrifugal force caused by rotation of barrel brings the steel balls to a certain height and impact and grind the materials. The ground materials are discharged through the discharging board thus the grinding process is finished.
Specification of rodMill
type
Cylinder diameter(mm)
Cylinder length
(mm)
Roller capacity(t)
capacity(t)
Motor power(kw)
Overall dimensions(m)
weight(kg)
MBS0918
900
1800
2.5
0.62-3.Ball mill equipment2
22
4.98×2.37×2.02
5700
MBS0924
900
2400
3.55
0.81-4.3
30
5.67×3.28×2.02
5880
MBS1224
1200
2400
5
1.2-4.9
45
6.45×2.88×2.Ball mill liner50
13700
MBS1245
1200
4500
6
2.0-6.5
55
8.82×3.07×2.63
17700
MBS1530
1500
3000
8
2.4-7.5
95
7.6×3.2×2.77
17200
MBS1545
1500
4500
10
3.6-11
110
9.Ball mill grinder1×3.4×2.77
21500
MBS1557
1500
5700
12
4.5-15
130
10.5×3.7×2.77
24400
MBS2046
2000
4600
16
8-30
210
9.8×4.7×3.85
35830
MBS2130
2100
3000 gringding bill for sale
14
9-38
210
8.7×4.8×4.4
40000
MBS2136
2100
3600
16
9-42
210
9.5×5.0×4.4
45000
MBS2145
2100
4500
21
9-48
245
10.3×5.2×4.4
56000
Note: The above technical parameters are just for your reference.
________
Henan Xingbang Heavy Machinery Co., Ltd. is a world leader in the manufacture and distribution of crushing, grinding, screening, washing and recycling, beneficiation, crusher parts and so on, as well as sand stone aggregate production line used in quarry, mining and cement plant.
Main products:ball mill,rotary dryer,rotary kiln,flotation cell machine,magnetic separator,spiral chute,spiral classifier, shaking table, vibrating screen,jaw crusher,ect.
http://howtocalcinedkaolin.cabanova.com/ molibdenium beneficiation plant
http://xbm-jaw-crusher12.cabanova.com/ jaw crusher China,ore crusher
http://copperflotationprocess.cabanova.com/ copper flotation process
http://beneficiationofironore.cabanova.com/ beneficiation of iron ore
http://beneficiationxbm.cabanova.com/ iron ore beneficiation